Discover the benefits of the American Tow Bar the next time you need to tow a vehicle. To rent a tow bar, try Allied Rental. They carry tow bars at all three locations, West Saint Paul, Hastings and in Burnsville, Minnesota.

Call:

952-882-4933
Installation Guide

Step 1:
For installation, park both vehicles on a flat surface before towing. Secure tow bar coupler on 2" ball hitch of tow vehicle (V-1.)

Step 2:
Pull vehicle to be towed (V-2) within 4 feet of (V-1). Place the emergency brake of (V-2) into the on position.
Step 3:
Attach T-J hook combo into shipping slots. T-hook portion placed in slot, usually works best.		 Step 4:
Thread tie down traps, Velcro end first into the hand ratchets. After tie down straps are connected to shipping slots, release emergency brake on (V-2).
Step 5:
Lift tow bar while tightening the hand ratchets. (V-2) will pull up against bumper stops. Tighten tie down trap. Do not over tighten.		 Step 6:
Secure excess strap to tow bar by wrapping Velcro around tow bar and strap. Repeat process on other side.
Step 7:
Tie down straps should be secure so that there is no loose or excess strap.		 Step 8:
Cables should always connect vehicle to vehicle. Route cables through upper ring handles. Criss-cross cables and secure cables to tow hitch of (V-1).
Step 9:
Route other end of the cable through the lower ring handles and attach to (V-2). Use cable extensions to ensure proper connection. Repeat process on other side. 		Step 10:
Turn ignition key to unlock steering wheel. Release emergency brake. Re-tighten tie down straps if neccssaiy. You are now ready to tow.
Download Information

To Download a PDF document of all installation & removal instructions and general American Tow Bar information, click the PDF icon below to load in your web browser, right click and select "save target as" to save to your computer's hard drive.

© 2007  American Tow Bar - All Rights Reserved